Table of Contents
Is 8mm bigger than 1/4 inch?
7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch. 9mm = almost 3/8 inch.
What is the standard equivalent to 8mm?
Metric / Standard Wrench Conversion Chart
| Bolt Diameter | Metric | Standard |
|---|---|---|
| 1/8″ | 8mm | 5/16″ |
| 3/16″ | 10mm | 3/8″ |
| 1/4″ | 11mm | 7/16″ |
| 5/16″ | 13mm | 1/2″ |
What is 8 mm equivalent to in inches?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 8mm | 5/16 Inch | 0.31496 Inches |
| 9mm | Just short of 3/8 Inch | 0.35433 Inches |
| 10mm | Little over 3/8 Inch | 0.39370 Inches |
| 11mm | 7/16 Inch | 0.43307 Inches |
What size is 5/8 inch in MM?
15.88 mm
Conversion table inches to mm
| Dimensions — Inches to Metric | ||
|---|---|---|
| 0.625” | 5/8” | 15.88 mm |
| 0.688” | 11/16” | 17.48 mm |
| 0.750” | 3/4” | 19.05 mm |
| 0.813” | 13/16” | 20.65 mm |
How long is 25 mm on a ruler?
What size is 25 mm in inches?
| MM | Approximate Size In Inches | Exact Size In Inches |
|---|---|---|
| 22mm | Just short of 7/8 Inch | 0.86614 Inches |
| 23mm | Little over 7/8 Inch | 0.90551 Inches |
| 24mm | 15/16 Inch | 0.94488 Inches |
| 25mm | 1 Inch | 0.98425 Inches |
What is a 36 mm in standard size?
Wrench Size And Conversion Table
| Inches | Millimeters | Spanner |
|---|---|---|
| 1.417 | 36mm | 36mm |
| 1.418 | 1 7/16 AF | |
| 1.480 | 7/8 Wworth; 1in BSF | |
| 1.500 | 1 1/2 AF |
Is a 3/8 socket the same as a 10mm?
The equivalent imperial size of a 10mm socket is a 3/8 socket.
What is 5/8 inch on a ruler?
Five-eighths inch or 5/8 inch on a ruler is a mark located between 1/2 inch and 1 inch. When the ruler divides the inches into eighths, 5/8 inch is the fifth mark on the ruler from the left side. If the ruler divides the inches into 16ths, then 5/8 inch is the 10th mark.